Attention
Standard Product
Standard Product
Showing all 36 results
-
Sale!
BRUSH DAWG® TRIMMER HEAD
Original price was: $89.99.$59.99Current price is: $59.99.
Add to cart -
PIT BULL TRIMMER LINE
$13.99
Add to cart -
BRUSH DAWG® REPLACEMENT BLADE
$28.99
Add to cart -
BRUSH DAWG® REPLACEMENT BUMP SPOOL
$12.99
Add to cart -
Replacement Fuel Spout & Vent Kit
$11.95
Spout #10050. KIT INCLUDES: Spout and cap, 1/2” replacement push in vent, Second base cap to fit additional cans, Flame arrester.Add to cart -
Replacement Multi-Use Plastic Jug Spout & Vent Kit
$11.95Spout #20050. KIT INCLUDES: Spout and cap, 1/2” replacement push in vent, Second base cap to fit additional cans, Filter screenAdd to cart -
HI-FLO® Replacement Spout & Vent Kit
$14.95
Spout #30051. KIT INCLUDES: Spout and cap, 8" spout extension for those hard to reach tanks, 1/2” replacement push in vent, Second base cap to fit additional cans, Flame arrestor The HI-FLO® spout will not fit in an unleaded fuel tank.Add to cart -
HI-FLO® Multi-Use Plastic Jug Spout & Vent Kit
$14.95
Spout #40051. KIT INCLUDES: Spout and cap, 8" spout extension for those hard to reach tanks, 1/2” replacement push in vent, Filter Screen, Second base cap to fit additional cans The HI-FLO® spout will not fit in an unleaded fuel tank.Add to cart -
HI-FLO® Replacement Spout with Unleaded Reducer
$14.95
Spout #50050. KIT INCLUDES: Spout and cap, Unleaded reducer, 1/2” replacement push in vent, Second base cap to fit additional cans, Flame arrestor.Add to cart -
HI-FLO® Multi-Use Plastic Jug Spout with Reducer Tip
$14.95
Spout #60060. KIT INCLUDES: Spout and cap, Unleaded reducer, 1/2” replacement push in vent, Second base cap to fit additional cans, Filter ScreenAdd to cart -
RIGID® Replacement Spout & Vent Kit
$11.95
RIGID® Spout #70070. KIT INCLUDES: Spout and cap, 1/2” replacement push in vent, Second base cap to fit additional cans, Flame arrestor. Can be used in new cars with capless design. Attaches to other EZ-POUR spouts (as shown in image gallery).Add to cart -
RIGID® Replacement Multi-Use Plastic Jug Spout & Vent Kit
$11.95RIGID® Spout #80080. KIT INCLUDES: Spout and cap, 1/2” replacement push in vent, Second base cap to fit additional cans, Filter screen.Add to cart -
PRE-MIX™ Spout
$8.99
Part #90090. KIT INCLUDES: 7" spout, cap, cap strap, flame arrestor.Add to cart -
Chilton Adapter
$5.98
Adapter #A1. Our Chilton Adapter allows EZ-POUR® Spout to be used with Chilton Fuel Cans. All EZ-POUR® Spouts fit the Chilton Adapter. EZ-POUR® Spout not included.Add to cart -
Jerry Can Adapter
$7.18
Adapter #A2. Our Jerry Can Adapter allows EZ-POUR® Spout to be used with both plastic and metal Jerry Cans. All EZ-POUR® Spouts fit the Jerry Can Adapter. EZ-POUR® Spout not included.Add to cart -
Metal Can Adapter with Solid Base Cap
$4.30
Adapter #A3. Fits old metal cans with 1 3/8", 1 1/2″, and 1 3/4″ neck. Requires separate purchase of any spout of your choice. EZ-POUR® Spout not included.Add to cart -
Racing Jug Adapter
$7.18
Adapter #A4. Requires separate purchase of any spout of your choice. Use our Yellow Solid Base Cap with this adapter. EZ-POUR® Spout not included.Add to cart -
Racing Jug Adapter
$5.98
Add to cart -
NO-SPILL® 63mm “F” Style Adapter
$6.70
Adapter #A5. Fits NO-SPILL® cans and all 63mm (2.5”) “F” style jugs, commonly used for herbicides, motor oil, hydraulic fluid, etc. EZ-POUR® Spout not included.Add to cart -
Solid Base Cap Black
$5.98
Part #B3. Solid base cap Black, solid cap for tank storage or transportation. Black cap is fine thread and typically fits older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans. pkg of 2.Add to cart -
Solid Base Cap Yellow
$5.98
Part #B4. Solid base cap Yellow, solid cap for tank storage or transportation, Yellow cap is coarse thread and typically fits Midwest, Scepter and our Chilton adapter, Jerry can adapter, and Racing Jug adapter. pkg of 2.Add to cart -
Solid Base Cap Grey
$5.98
Part #B5. Fits older Wedco and later model Briggs and Stratton cans. Same threads as the Wedco #84004. pkg of 2.Add to cart -
Gray Base Cap
$0.01
It Fits Wedco, late model Briggs and Stratton, Stancan, TeePee, and TruSolve cans. Please add this item to the cart if you have one of those cans.Add to cart -
Spout Cap (Rubbermaid Vent Cap)
$3.58
Part #C1 Regular spout cap, cap that fits both our universal spout, and our water spout, also fits some vent caps on older Briggs and Stratton, Rubbermaid, essence and Gott cans. This contains 2 caps and cap straps.Add to cart -
HI-FLO® Cap
$4.30
Part #C2. HI-FLO® spout cap fits our both our HI-FLO® gas spout and our HI-FLO® water spout. pkg of 2.Add to cart -
Wedco Vent Cap
$4.30
Part #C3. Wedco vent cap, fits many old Wedco and Scepter vents. pkg of 2.Add to cart -
RIGID® Spout Caps
$4.30
#C4 RIGID® spout caps EZ-POUR® Spout not included.Add to cart -
Extension Kit
$9.12
Part #EXT-100. EZ-POUR® Spout not included.Add to cart -
Flame Arrestor
$4.78
Part #F2. Flame arrestor, fit all of our spouts both regular, HI-FLO, used as a filter screen on our water spouts. (Fits EZ-POUR Spouts ONLY.) pkg of 2Add to cart -
EZ-POUR® Koozie Blue
$1.95
pkg of 1Add to cart -
EZ-POUR® Koozie Red
$1.95
pkg of 1Add to cart -
Half Inch Reamer
$9.12
Part #R1. Used to make a perfect 1/2” hole in can for the push in vent.Add to cart -
SEAL ALL VENT SEALER
$5.40
Part #S2 - Used to seal the push in vents.Add to cart -
Sealing Disc
$2.20
Add to cart -
Push In Vent
$4.78 – $16.92
Part #V1. Push in vent, this fits many older Blitz, Midwest and other cans that have a 1/2” hole for vent. Also fits many water jugs with similar vent. Can be installed by drilling 1/2” hole and then just pushing in vent. pkg of 2.Select options -
Chilton Vent Cap
$4.58
Part #V2. pkg of 2. EZ-POUR® Spout not included.Add to cart