Universal Fuel & Water Jug Spout


Do you have an old Wedco or late model Briggs and Stratton cans that our yellow base cap fits too tightly?  If so, CLICK HERE to request free replacement caps.


Please do not email us about specific cans. We do not know or keep record of all the model numbers of the various can manufactures.  Our spout fits almost all Rubbermaid, Gott, Essence, Wedco, Briggs, Scepter, Eagle, and Blitz, both old and new. Even though our spout will thread on the new cans, we do not promote using our spout to bypass the EPA emission standards on the new cans. If you purchase a spout and it does not fit, you can return it for a complete refund. Wedco cans were made with a wide variance in tolerances. Our base cap may fit too tightly on some. One work around is to use your old base cap with our spout. 

Did this not answer your question?  Please read the following Frequently Asked Questions: 


1. What type of fuel cans may I use this product on?

ANSWER – Only for use on portable fuel containers manufactured prior to January 1, 2009

2. What are the two different color base caps for?

ANSWER – The black cap has fine threads and generally fits the old Rubbermaid, Blitz , Briggs and Stratton, Essence and Gott cans, the yellow cap has coarse threads and fits the Midwest, Scepter and Plastic Eagle.  The Yellow base also fits all EZ-POUR adapters. The Gray base, which may be requested here, fits the older Wedco, and new Briggs and Stratton.

3. Are there any cans that EZ-POUR® spouts do not fit?

ANSWER – Yes the old Chilton cans with an extended neck and a black spout, Orange Gott cans, and some metal gas cans with a 2” opening.

4. Why are there two small caps?

ANSWER – Both caps fit the spout, one can be used for the vent on older Rubbermaid cans, or you can use it for a second spout cap in case you lose the first.

5. The new base cap fits too tight what do I do?

ANSWER – Try using the new spout and your old base cap, there were many molds over the years and the tolerances varied greatly.

6. How flexible are the spouts?

ANSWER – The spouts are made of HDPE plastic and not rubber, they are flexible, however bending them in the cold, or severe bends may cause cracking. Use care when pouring to avoid spills.

7. If I want to install a new vent, what do I use?

ANSWER – Use a taperered reamer, step drill or 1/2″ wood paddle bit. Do not use a twist drill bit, it will make an irregular hole. 

8. Which base cap fits the Chilton Adapter?

ANSWER – The Yellow Base Cap with the spout and the Yellow Block Off Cap work with the Chilton Adapter.

9. Which base cap fits the Jerry Can Adapter?

ANSWER – The Yellow Base Cap with the spout and the Yellow Block Off Cap work with the Jerry Can Adapter.

Not finding your answer in the information above?  CLICK HERE to contact us.