You’ve heard about the EZ-POUR® Universal Fuel & Water Jug Spout before, but now it’s time to purchase one for your own gas can. Not sure which spout is the right fit? There are four different spout kits to choose from and each serves a different purpose. Continue on for the products EZ-POUR® has to offer:
Replacement Fuel Spout & Vent Kit
If you’re looking to replace a spout on a gas can, then you can’t go wrong in choosing the Replacement Spout & Vent Kit. This product is versatile and can be used in almost all situations. Whether you need to fill up a lawn mower, string trimmer, or generator, the replacement spout will get the job done. In case it doesn’t fit your can, adapters are available online.
Kit includes:
- Spout and cap
- 1/2” replacement push-in vent
- Flame arrester
- Yellow and black base caps*
HI-FLO® Replacement Spout & Vent Kit
While a gallon of gasoline might be enough for yardwork, real fueling requires multiple gallons. A machine that takes diesel can take minutes to fill with a typical gas spout, so avoid wasting time and upgrade to a HI-FLO® Replacement Spout & Vent Kit. A five-gallon gas can empties in 35 seconds flat with this spout. It’s perfect for boats, ATVs, farming equipment, and even diesel trucks – just as long as your gas tank has a wider opening.
Kit includes:
- Spout and cap
- 8″ spout extension for those hard-to-reach tanks
- 1/2” replacement push-in vent
- Flame arrestor
- Yellow and black base caps*
HI-FLO® Replacement Spout with Unleaded Reducer
Gas tanks with a smaller opening need a HI-FLO® Replacement Spout with Unleaded Reducer. This spout produces the same results as a HI-FLO® Replacement Spout with an included unleaded reducer tip for use in everyday vehicles. The average gas tank holds nine to 16 gallons of gasoline, so why not fuel up faster?
Kit includes:
- Spout and cap
- Unleaded reducer
- 1/2” replacement push-in vent
- Flame arrestor
- Yellow and black base caps*
Rigid Replacement Spout & Vent Kit
For vehicles that utilize a capless fuel system, theRigid Replacement Spout & Vent Kit is the right choice to make. Simply insert the rigid spout inside the opening of the fuel tank and pour slowly. It is also short and exceptional for small one gallon containers used for weed eaters, chainsaws, and other pieces of handheld equipment.
Kit includes:
- Spout and cap
- 1/2” replacement push-in vent
- Flame arrestor
- Yellow and black base caps*
EZ-POUR® spout kits are available by delivery destination. You can also find parts, adapters, and new products online at ezpourspout.com.
*Yellow cap is coarse thread and typically fits Midwest, Scepter and our Chilton adapter, Jerry can adapter, No Spill adapter, and Racing Jug adapter. Black cap is fine thread and typically fits older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans.